Precision Cycle Inc.

Reviews

Reviews are sorted by relevance, with the most helpful and insightful feedback listed first for easy reference.

  Bill McLeod
a week ago
Hey, I've had alot of work dun from out of this shop but on the most recent job I had 4 cylinders bored and reassembled the powerhead and managed to drive it 27 hours but now the compression is off 20 lbs from one side to the next so it doesn't even run. Is that even even possible if the cylinders were bored the same size side to side? I'd not be too sure about longevity and or honesty from hear out now. That is going backwards on alot of my own labor. I'll try somewhere else next time, but thanks for past jobs that all worked out just fine. Bill

  Kip Kern
11 months ago
Just had a "83" 510 Husqvarna cylinder bored by Don. Outstanding work indeed, quick turnaround and very reasonable prices. Can't ask for much more and I'll be back for sure!

  Banshee Husky
3 years ago
I went here by recommendation from a friend and I'm absolutely glad I took him up on this place. I had a 77 CR125m I was restoring and Don at Precision Cycle was a tremendous help. Super friendly, knowledgeable and thorough in his work. His pricing was absolutely perfect and speed of work was much quicker than I expected.Most places offer Quality, Speed, or Low Price but you can only pick two, at this location you get all three for sure! Will be returning for any future work that pops up!

  D Holmes
6 years ago
I had to get cylinders bored on my outboard and its getting close to spring. Luckily I found precision cycles inc. Read the reviews and calledspoke with Don the owner great person. Sent my power head to himhe had work done the day after receiving it got me a rebuild kit to go with it. I got it back 1 1/2 weeks after shipping it to him and the work is great.It is really nice to deal with people and companies like this. I would recommend him to anyone and will to all my friends. THANKS DAN

  Robert Johnston
5 years ago
Wish I could give them 10 stars. One of the injectors went lean on my Yamaha 250 HDPI and destroyed the piston. This scored the liner and damaged the exhaust port. A new block was $4,100, not good. After some research, I found Precision Cycle. Called them to discuss a possible replacement of the liner. They were very helpful and knowledgeable. I built wood shipping crate and send it off for repair. Since I was going to be in the area in 3 weeks I asked that it be ready for my pick up then. Three weeks later and precisely on time, I picked up the block with the new liner. They could not have been more friendly and more professional.Once home, I reassembled the engine with a new piston and rings. The liner was perfect. I have put about 50 hours on the motor since and it has worked flawlessly. The cost of repair was about $400 or 90% less than a new block! I cannot recommend them more highly! Nice Job!

  Keith Overton
3 years ago
Precision cycle is simply the best! I'm an avid fisherman and I found out that my 50 hp outboard had a broken piston ring. Worst news possible. I needed the cylinders bored and then needed to know the bore size before ordering the rebuild kit. Don bored out my cylinders, and then ordered and received the kit, all in less than 24 hours! That's service at it's finest. Don's prices are also very reasonable. I'll never use another machine shop as long as Don's in business.

  That Honda Channel
2 years ago
Don helped me in a pinch with a 2 day turn around. Needed a new v-band flange welded to my downpipe. Don has earned my business based on time, speed, price and professionalism.Don thank you for your service to this country and thank you for helping me out on such short notice. You sir are worth your weight in gold.

  Robert McCullough
11 years ago
Called around looking for a machine shop to do a small job and the owner Don answered the phone. He was friendly and listened to the description of what we wanted done. Dropped off the pieces at his shop in the morning and he took detailed notes. Came back the next afternoon and he had it completed. The work was done perfectly, on time, and for the price quoted. All the welds were clean and even, the pieces were square and straight and he took care to prime all the bare metal even though we hadn't discussed that. He didn't miss anything we had asked for and took the time to make sure the job looked good. If you need a machine shop in this area we would highly recommend this shop. We will use them again if we need anything machined or welded.

  James Martin
8 years ago
Had these guys weld up a custom header/exhaust connection for my Honda Grom... excellent service and the quality was amazing. On time and on budget. And they have a DeLorean to look at in the shop! Couldn't recommend then any higher. I'll be back.

  Mark R
7 years ago
I found Don on the internet and spoke to him about boring and honing my 2000 Yamaha 90 hp outboard that had lost a rod bearing and scored a cyl. He stated he could get it done quickly so I gave him a shot. Figuring it was peak boating/riding season it might get shelved for a bit. Absolutely not!! I sent it to him on a Wednesday he had the work done by Friday and it was back at my door on Tuesday. After checking all the tolerances of all the piston rings they were spot on to the tolerances in the manual. Absolutely perfect. He's a great guy, communicates well, and is willing to answer questions and gets the job done right! What more could you ask for! Thank you Sir,Mark, Myrtle Beach, SC.

  John Punderson
7 years ago
I needed a helicore on the stripped hanger of my road bike. Last chance to save the frame. After suggesting I might find a shop closer to home, Don gladly agreed to do whatever it took to get me riding again. Despite not being real familiar with bicycles he grasped what I needed, considered several possible fixes and finally did a great helicore. He was determined to solve my problem and be of service in whatever way was required. He is highly skilled and has a great heart. Would highly recommend Precision Cycles. Well worth a 75 minute drive!John Punderson Indian Harbour Beach FL

  John Fish
6 years ago
The owner seems a nice guy...but I expected a better job for the money I spent. I ended up buying used parts for my motor on Ebay for much less than what he charged me for his labor, after the one he "fixed" failed.

  Angel Rodriguez
2 years ago
Great work words can t explain the knowledge and true customer service Don holds with his skills and ability to make a worn out cylinder new also better than OEM fast turnaround thank you Don

  nathan keith
6 years ago
Precision owner was able to correct a problem for me that same me time and lots of money on my service item repair. Their over 40 years of experience will serve you well. Excellent!!!!

  Wesley Loomis
4 years ago
Excellent place to go. Don is super friendly and genuinely cares. Had him remove old bearings and press new ones in on my crf450r.

  Tommy Alvarez
3 years ago
Hands down the best around town had my cylinder bored in less than 24hrs DON YOUR THE MAN all my group will be visiting your for all types of work for sleeves ,aluminum welding etc.. great business keep it up

  AEROFULL AVIATION
3 years ago
The lower part of my outboard engine required a presicion welding job . Don and Tom delivered the expected results on craftmanship , quality a�d time very satisfactorily .Thank you

  Charlie B
8 years ago
Needed a dirt bike crank assembled and trued. Don did a great job and turned it around in less than 48 hours. Would recommend to anyone.

  Rene Mosquera
5 years ago
I enjoyed working with Precision Cycle Inc. He helped me with my handlebars for my Victory Vision and my mirrors. Will continue to go back when I need help.

  Doug Catlett
7 years ago
They do absolutely pristine craftsman-like work at a very reasonable price and they took the time to help explain to us the process and how to get what we wanted & needed.

  Michael Dorner
11 years ago
i called 10 different shops to work on my turbo and he was the only one willing to machine it i will be sure to bring him more of my parts to work on plus the quick turn around time hope this helped

  Mat Gray
3 years ago
Don is an exceptional machinist/welder/fabricator. Had cylinders rebored on a 74 Motorcycle. Great job.

  Tracy Schweitzer
3 years ago
the man has a boring job and he loves he's been in business 40yrs a very good man knows what he's doing my experience one of the best. service good prices good

  Greg Russell
8 years ago
I own a business and have sent them work. They are awsome. I would rather send it to them than take it down the street. Thank you for everything and I'll be calling soon

  Pamela Handerson
8 years ago
I must say, this place is a great find! The staff is very knowledgeable and genuinely friendly. They delivered service in a timely and efficient manner. I give them a solid 5 of 5 stars.

  David Farley
11 months ago
Very knowledgeable very nice good prices excellent workmanship

  Grandpa Squarepants
7 years ago
Very Fast service and great quality ! Ive had 2 outboard blocks board at PCI and both were perfect .

  Gio I
6 years ago
Scam artist tells you credit card holds product 1 week and does no work. Avoid avoid avoidSend to millennium half the price avoid avoid

  William Fraczek
5 years ago
Very friendly and helpful and went out of there way to make sure it was right. I will tell everyone I know that they do the best work. I will be back.

  ryan spencer
5 years ago
Best place by far! Great service! Great prices! All around awesome guy! Thank you again! Highly recommend!